ThermaCELL® Mount Kit –

 

• Add the ThermaCELL® Mount to any of the joints of your Flex Series Bow Holders,

​​

• Use this ThermaCELL® Mount with your EZ-AIM III auger,

​​

• Use this ThermaCELL® Mount with your EZ-Aim Ratchet Strap Game Camera Mount,

​​

• Use This ThermaCELL® Mount with your EZ-Aim T Post  Game Camera Mount,

 

• Bungee has three points of contact,​

​

• The Bungee holds the unit firmly in place and allows easy access to the controls

 

• Unit is Cathodic Acrylic coated over an epoxy primer,

​​

 

You know how annoying and aggravating natures insects can be and like many of us you may have turned to the ThermaCell® Mosquito Repellent for relief. Finding a place where it is both strategically placed and not in the way can be a major task. 

​

Slate River gives you several ways to do this.

​

Option 1 –

​

If you already have any of the following Slate River products you can convert it to a ThermaCELL® holder:

 

• Flex Armstrong™ Bow Holder

• EZ-Aim III Trail Camera Mount

• EZ-Aim ratchet Strap Trail Camera Mount

• EZ-Aim T Post Trail Camera Mount

• Screw in Crossbow Holder

• Ratchet Strap Crossbow Holder

​

All you need to do is remove the 4” camera mount arm and replace it with the ThermaCELL® wire form mounting platform and you are ready to go,

 

Option 2 –

​

If you already have any of the following Slate River products you can add the ability to mount a ThermaCELL® by purchasing a ThermaCELL® mount kit and installing it at any of the pivot points using the longer thumb screw that comes with the kit.

​

• Flex Two Arm Bow Holder

• Flex Two Arm Crossbow Holder

• Flex Armstrong™ Bow Holder

​

Option 3 –

​

If you already have any of the following Slate River products you can add the ability to mount a ThermaCELL® by purchasing a ThermaCELL® mount kit and installing it on top of the 4"camera mount arm using the longer thumb screw that come with the kit,

​

​

• EZ-Aim ratchet Strap Trail Camera Mount

• EZ-Aim T Post Trail Camera Mount

• Screw in Crossbow Holder

• Ratchet Strap Crossbow Holder

​

Option 4 –

​

If already have and EZ-Aim III Trail Camera Mount, you can add a ThermaCELL® Mount in addition to the 4” mounting arm allowing you to have a Go Pro® alongside of your ThermaCELL® unit.  Because the threaded stud on the EZ-Aim tree mount is not long enough to accommodate the thickness of the mount arm and the ThermaCELL® mount you also will need to purchase a 3” extension kit.  The 3” extension replaces the 4” mounting arm and then both the mounting arm and the ThermaCELL® mount are attached to the other end of the 3” extension arm.

​

The rubber bungee has three points of attachment and holds the unit firmly on place on the wire form platform while not interfering with ay of its functions. 

​

​

The Kit contains one (1) ThermaCELL® wire form, one (1) bungee, one (1) 2.8" thumb screw and two (2) Derlin washers.