Ratchet Strap Crossbow Holder

​

 

• Works on trees from 4 to 24 inches in diameter,

 

• The strap is 76” long with a 2” Carabiner,

 

• Ratchet can load the strap to 1,000 #,

 

• Crossbow hook rotates 90 degrees in both directions for precise positioning

​​

• The holder is made from 3/8” steel rod,

 

• The hooks are 4” long & 3” apart,

 

• The vinyl coated hook protects your bow and allows it to be easily and quietly removed,

​​

• The steel body and strap mechanism are Cathodic Acrylic coated over an epoxy primer,

​

 

The EZ-Aim Ratchet Strap mount was developed for those who hunt on public lands or choose not to screw anything into their trees. The ratchet can load the strap to 1,000 # so your crossbow does not move. The strap has a carbineer attaching the two ends, so you do not need three hands to mount the unit.

 

The Cross-Bow hook is vinyl coated steel rod.  It has great strength and the vinyl coating protects your bow and minimizes noise.  The two hooks are 4” long and are spaced 3” apart so your bow is held securely in place.

 

If you desire a little more flexibility in positioning your bow you could add an eight-inch extension arm between the tree auger and the crossbow hook. This can be purchased as an accessory.

 

The ratchet strap is the same one that is used in the Ratchet Strap Trail Camera Mount. This means that if you already own a Ratchet Strap Trail Camera Mount an option for you would be to purchase just the Banjo Crossbow Holder accessory and use your current ratchet strap.