Arm 4 with 3” Extension Kit -

 

  • Allows you to mount two (2) cameras or one (1) camera and one (1) solar panel on your Slate River EZ-Aim III Game Camera Mount,

  • A third Arm 4 could be added if there is a need to install three (3) items on one (1) EZ-Aim III mount,

 

  • Most accessory that have a ¼ -20 threaded insert can be mounted on the Arm 4 Kit,

 

There are times when it would be convenient to install more than one item on you Slate River EZ-Aim III Game Camera Mount.  A second camera or a solar panel are the most common.

 

This kit allows you to do just that and contains everything needed to add one (1) item.  If the desire is to install three (3) items on one EZ-Aim III Trail Camera Mount an additional Arm 4 Kit would also be required.  (Note: An additional 3” extension arm is not needed.)

The three (3) inch extension is required to add additional items to the EZ-Aim Camera Mount because the threaded post that holds the camera arm only has enough thread to accommodate the thickness of one (1) arm.  When the three (3) inch extension arm is placed on that threaded post you can then install up to three (3) arms on the other end of the 3” extension.

Each arm 4 kit comes with one (1) – 2.8” long thumb screw, two (2) nylon washers, one (1) Arm 4 assembly and one (1) three-inch extension arm.

Customize Your Camera Mount
EZ-Aim III, 3_ Ext, Snyper _ Spartan Cam
With Two (2) Trail Cameras
Requires the purchase Of one (1) Arm 4 with 3” Extension Kit
EZ-Aim III, 3_ Ext, Snyper Camera _ Sola
With one (1) Trail Camera and one (1) Solar Panel
Requires the purchase Of one (1) Arm 4 with 3” Extension Kit
EZ-Aim III, 3_ Ext, Go Pro _ Ozonics Uni
With one (1) Go Pro® And one (1) Ozonics™
Requires the purchase Of one (1) Arm 4 with 3” Extension Kit
You can do the same set ups using one (1) 8” extension arm and one (1) Arm 4 Kit.

2020 Chevy Productions